Electrical / Electronic Product Engineer
Akkodis is seeking a Electrical / Electronic Product Engineer for a multi-year contract position with a global leading client in the automotive industry, located in Dearborn, MI.
In this role you will be responsible for leading the design and development of battery HIL simulator hardware functions and requirements.
Pay/Salary Range:
$32/hr - $34/hr $66,560/yr - $70,720/yrJob responsibilities include:
o Work with BMS Control/Software Engineers, Vehicle System Engineers, and battery HIL software engineers in the development of the hardware requirements for the battery HIL simulators based on BMS needs.
o Lead the development of battery HIL hardware schematics and layouts both internally and with suppliers.
o Conduct failure mode analysis of the various hardware components and failure mode management strategies.
o Coordinate with electronic/EMC specialists and complete development and validation of the electronic circuit development.
o Coordinate and conduct design verification testing at the electronics and battery HIL testbed level.
o Isolation detection topologies, strategies, and processing.
o Battery control hardware design architectures.
o Data sampling/filter design for current sensor, Battery Pack Sensing Module (BPSM) data (cell/PACKV), coil currents.
o Implementation and testing of low noise instrumentation circuits.
o Opamp, logic gate, and MOSFET driver circuit analysis.
o Data isolator circuit implementation.
o Sensor interface to micro (including hall effect devices).
o Implementation of 32 bit micro into automotive module - low level details & analysis.
o Controller networking architectures and hardware.
Qualifications:
o 2
years of hands-on experience with electronic module design and testing.
o 2
years of good working knowledge of Microprocessor based controller design and testing.
o 2
years of good working knowledge of communication circuits and protocols (e.
g.
CAN, Serial, etc.
).
PREFERRED:
o 5
years of hands-on experience with electronic module design and testing.
o 1
years of experience in Li-Ion battery controls.
o 1
years of electronic manufacturing experience.
o 1
years of experience in Spice or similar for circuit design simulations.
o 1
years of experience with AltiumIf you are interested in this Electrical / Electronic Product Engineer job in Dearborn, MI then please click APPLY NOW.
For other opportunities available at Akkodis go to.
If you have questions about the position, please contact Ian Carlson at Equal Opportunity Employer/Veterans/DisabledBenefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan.
Our program provides employees the flexibility to choose the type of coverage that meets their individual needs.
Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria.
Disclaimer:
These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a clientTo read our Candidate Privacy Information Statement, which explains how we will use your information, please visit The Company will consider qualified applicants with arrest and conviction records.
Equal Opportunity Employer/Veterans/DisabledTo read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ;br>The Company will consider qualified applicants with arrest and conviction records Recommended Skills Automotive Industry Battery Pack Circuit Design Communication Electronics Electronics Manufacturing Estimated Salary: $20 to $28 per hour based on qualifications.
In this role you will be responsible for leading the design and development of battery HIL simulator hardware functions and requirements.
Pay/Salary Range:
$32/hr - $34/hr $66,560/yr - $70,720/yrJob responsibilities include:
o Work with BMS Control/Software Engineers, Vehicle System Engineers, and battery HIL software engineers in the development of the hardware requirements for the battery HIL simulators based on BMS needs.
o Lead the development of battery HIL hardware schematics and layouts both internally and with suppliers.
o Conduct failure mode analysis of the various hardware components and failure mode management strategies.
o Coordinate with electronic/EMC specialists and complete development and validation of the electronic circuit development.
o Coordinate and conduct design verification testing at the electronics and battery HIL testbed level.
o Isolation detection topologies, strategies, and processing.
o Battery control hardware design architectures.
o Data sampling/filter design for current sensor, Battery Pack Sensing Module (BPSM) data (cell/PACKV), coil currents.
o Implementation and testing of low noise instrumentation circuits.
o Opamp, logic gate, and MOSFET driver circuit analysis.
o Data isolator circuit implementation.
o Sensor interface to micro (including hall effect devices).
o Implementation of 32 bit micro into automotive module - low level details & analysis.
o Controller networking architectures and hardware.
Qualifications:
o 2
years of hands-on experience with electronic module design and testing.
o 2
years of good working knowledge of Microprocessor based controller design and testing.
o 2
years of good working knowledge of communication circuits and protocols (e.
g.
CAN, Serial, etc.
).
PREFERRED:
o 5
years of hands-on experience with electronic module design and testing.
o 1
years of experience in Li-Ion battery controls.
o 1
years of electronic manufacturing experience.
o 1
years of experience in Spice or similar for circuit design simulations.
o 1
years of experience with AltiumIf you are interested in this Electrical / Electronic Product Engineer job in Dearborn, MI then please click APPLY NOW.
For other opportunities available at Akkodis go to.
If you have questions about the position, please contact Ian Carlson at Equal Opportunity Employer/Veterans/DisabledBenefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan.
Our program provides employees the flexibility to choose the type of coverage that meets their individual needs.
Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria.
Disclaimer:
These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a clientTo read our Candidate Privacy Information Statement, which explains how we will use your information, please visit The Company will consider qualified applicants with arrest and conviction records.
Equal Opportunity Employer/Veterans/DisabledTo read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ;br>The Company will consider qualified applicants with arrest and conviction records Recommended Skills Automotive Industry Battery Pack Circuit Design Communication Electronics Electronics Manufacturing Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
